KINKI STUDIO VISION DAC-1

VISION DAC-1 INFO

VISION DAC-1 is a Balanced DAC, equipped with a single AKM high-performance, high sound quality digital audio chip AK4495, with built-in XMOS XU208 USB interface, FEMTO clock, dedicated Word Clock input, supports up to 32/384k, DSD128 via USB, and 24/192k and DoP DSD64 via SPDIF

DAC Parameters

  • DSD: DSD64 (2.8224MHz),
  • DSD128 (5.6448MHz) PCM: 44.1, 48, 176.4, 192, 384, 768KHz
  • Sampling Rate: PCM 32/384KHz, DSD128/5.6448Mhz
  • S/N Ratio: 116db
  • Dynamic Range: 122dbA
  • THDN%: 0.008% @ 2Vrms
  • Frequency Response: 3-150KHz (0-3db)


Input / Output

  • Input: Coax, BNC, AES/EBU, USB
  • Output: RCA (3Vrms), XLR (6Vrms)
  • WCLK: BNC Word Clock Input


Dimension & Weight

  • Dimension: 430W x 90H x 330D
  • Weight: 11KG

KINKI STUDIO VISION THR-1 HEADPHONE AMP

VISION THR-1 INFO

The VISION THR-1 headphone amp is designed to drive any headphone, literally. RMS output power rated at 2.2W 300Ω, 1.3W 600Ω. It comes with tripper headphone output jacks. Two Neutrik 6.3mm single ended jacks cater for low impedance and high impedance headphone, respective. One balanced Neutrik 4-Pin jack for the convenience to use with balanced headphone.

Parameters

  • Frequency Response: 20-300kHz (±1dB)
  • THDN: 0.0014% (80dB) S/N Ratio: >98dB
  • Dynamic Range: >115dB


Input / Output

Input

  • Input Sensitivity: 2.25Vrms – 3.6Vrms
  • Input Impedance: 50Ω
  • Input Connector: RCA x 1, XLR x 1


Headphone Output

  • Output Voltage: ±70VAC
  • Output Connector: 6.3mm x 2, XLR 4Pin x 1


Preamp Output

  • Output Voltage: 2.25Vrms – 3.6Vrms
  • Output Connector: XLR x 1


Dimension & Weight

  • Dimension: 270W x 100H x 210D
  • Weight: 6KG

KINKI STUDIO EX-M1 AMPLIFIER

EXM1 INFO

The EX Series is tuned to reproduce sound quality with balance mid and smooth extension in both ends, high and low extension. The EX-M1 is fully modular, a dual mono design in a single chassis. Rich in tonal quality, details, dynamic, and high resolution. Silky smooth volume control thanks to the discrete R2R volume control, of which known for its precise and accurate volume adjustment with precision matched resistors.

Parameters

  • Frequency Response: 10-150kHz (±3dB)
  • THDN: 0.0232%; 0.006% (A-Weighted)
  • S/N Ratio: >103dB
  • Output Power: 215W (8Ω), Both channel driven
  • Damping Factor: 2000
  • Gain: Normal Gain 26 dB, Lowered Gain Switch 22 dB
  • Max Output Voltage: 55VAC
  • AC Power: 110/240VAC, 50/60Hz (Factory configure)


Input / Output

  • Input Sensitivity: 2.25Vrms – 3.6Vrms
  • Input Impedance: 50kΩ
  • Input Connector: RCA x 3, XLR x 1
  • Output: Speaker Binding Post 4mm L/R Channel


Dimension & Weight

  • Dimension: 430W x 125H x 370D
  • Weight: 25KG

KINKI STUDIO EX-M1+ AMPLIFIER

EXM1+ INFO

"The true universal integrated amp, period". This is the design aim of the new EX-M1+. The answer for many of our customers who were looking for an End Game integrated amp with preamp output, home theater bypass input, fully dimmable display.

THE GOOD OF EX-M1, PRESERVED

The EX-M1+ is designed based on the award-winning EX-M1. The good of the EX-M1 is well-preserved. Advanced microprocessor-controlled, relay-based R-2R steps attenuator, dual 300VA UK made AMPLIMO transformers, quasi monoblocks amplifier stage with EXICON MOSFET lateral, known for its ultra-fast and dynamic sonic response where the EX-M1+ benefited with.


PREAMP OUT, HT BYPASS

EX-M1+ is equipped with the most anticipated features – Preamp Output and HT Bypass. We did it differently though. The Preamp Output can be enabled/disabled by the completely redesigned Remote Control Unit. It allows you to use the EX-M1+ as a preamp only, or integrated amp where the preamp output can be connected to the subwoofer or to our monoblocks EX-B7 to biamp the loudspeakers.

The same goes to HT Bypass Input. A single press on the Remote Control Unit button enables the HT Bypass Input. The preamp stage is bypassed, EX-M1+ functions as a power amp.

 

WHAT’S MORE?

The display can now be dimmable, off completely, literally.

We have also improved the internal wiring with pure OCC copper and overly well-made gold plated connector for the line stage input signal and transformer primary stage.

 

SOUND CHARACTERISTIC

Neutrality and musicality were the goals to achieve. Rich tonal quality, vivid sound imaging, details, high resolution and dynamic. The choice of the components, design, and tuning does just that.

It is the Kinki Studio gears’ sound signature.

 

Parameters

  • Frequency Response: 10-150kHz (±3dB)
  • THDN: 0.0232%; 0.006% (A-Weighted)
  • S/N Ratio: >103dB
  • Output Power: 215W (8Ω), Both channel driven
  • Damping Factor: 2000
  • Gain: Normal Gain 26 dB, Lowered Gain Switch 22 dB
  • Max Output Voltage: 55VAC
  • AC Power: 110/240VAC, 50/60Hz (Factory configure)


Input / Output

  • Input Sensitivity: 2.25Vrms – 3.6Vrms
  • Input Impedance: 50kΩ
  • Input Connector: RCA x 3, XLR x 1, HT BYPASS x 1
  • Output: Speaker Binding Post 4mm L/R Channel
  • Output: Preamp Output x 1


Dimension & Weight

  • Dimension: 430W x 125H x 370D
  • Weight: 25KG

KINKI STUDIO EX-P7 PRE AMP

EX-P7 INFO

The EX Series is tuned to reproduce sound quality with balance mid and smooth extension in both ends, high and low extension. True Class-A biased, fully discrete input and output stages are the heart of the EX-P7. Rich in tonal quality, details, and high resolution. Silky smooth volume control thanks to the discrete R2R volume control, of which known for its precise and accurate volume adjustment with precision matched resistors.

Parameters

  • Frequency Response: 0-150kHz (±1dB)
  • THDN: 0.003% (-80dB)
  • S/N Ratio: >90dB
  • Channel Seperation: >90dB


Input / Output

  • Input Sensitivity: 2.25Vrms – 3.6Vrms
  • Input Impedance: 50kΩ
  • Input Connector: RCA x 2, XLR x 1
  • Output Voltage: 2.25Vrms – 3.6Vrms
  • Output Impedance: 75Ω
  • Output Connector: RCA x 2, XLR x 1


Dimension & Weight

  • Dimension: 430W x 125H x 370D
  • Weight: 13KG

KINKI STUDIO EX-B7 MONOBLOCKS

EX-B7 MONOBLOCKS INFO

The EX Series is tuned to reproduce sound quality with balance mid and smooth extension in both ends, high and low extension. The EX-B7 is the statement monoblocks power amp. Each monoblock is equipped with dual 300VA UK Made Amplimo Toroidal Transformers, 4 pairs of EXICON Laterals MOSFET and a huge power reservoir capacitors farm. It is essential doubled of what the award-winning EX-M1 offered. The good of EX-M1 remains, rich in tonal quality, details, dynamic, and high resolutions.

Parameters

  • Frequency Response: 0-2.5MHz (±3dB)
  • THDN: <0.05% (-80db)
  • S/N Ratio: >110db(0.01Hz- 1 MHz), >130db (A-Weighted)
  • Output Power: 250 W RMS(2-8 Ohms) Max Instantaneous
  • Power: 400w RMS (8 Ohms)
  • Max Output Voltage: 84VAC, 20A
  • Slew Rate: 200 V /us (Rise Time < 300ns)
  • AC Power: 110/240VAC, 50/60Hz (Factory configure).
  • Power Consumption: 30W Idle, 600W Max Outpu


Input / Output

  • Input Sensitivity: 1.45Vrms
  • Input Impedance: 51kΩ (Acceptable Range 10k-52kΩ)
  • Input Connector: RCA x 1, XLR x 1
  • Output: Speaker Binding Post 4mm L/R Channel


Dimension & Weight

  • Dimension: 330D x 230W x 190H
  • Weight: 17KG ea.